Filopto supports the Topcon connector. You must have the appropriate software installed per the instructions of the manufacturer prior to being able to use the Filopto Topcon connector. You must also have acquired a Topcon Filopto connector license from Filopto and configured the connector in the Filopto EMR system Settings.
We are constantly adding new devices that we support, Please call us for your particular device.
Partial list of supported devices and software:
•- EyeRoute/Synergy
•- EZ Capture
•- CT-1
•- CT-1P
•- CL-300
•- CV-5000s Version 1.2
•- TRK-2P
•- KR-1
•- KR-800
•- KR-800S
•- OCT Maestro Synergy
Topcon equipment can be generally divided into two types;
1) Imaging and
2) non-imaging or data devices.
Imaging type devices (which produces a picture) typically will require the EyeRoute/Synergy or EZ capture connector for their output to be integrated into Filopto. The setup for this type of connector is located in the System setting/EMR/Other setting section of Filopto.
The Non-Imaging devices typically will require a Topcon connector for the device which will request on the first attempt to be connected, the shared location for the data file created by the device. This location is stored in the Filopto.ini file for each workstation( C:\ProgramData\Filopto10\ ). If a change to the shared folder must be made, the workstation Filopto.ini file can be edited to make the correction to the folder path. Review the Topcon device manual on how to create and save the data file.
See configuration file for Topcon settings in Filopto.ini
